Strahlmittel Strahlanlage
KrampeHarex Lösungspfeil


Roughening / Tarnishing

Roughening helps create a positive fit, e.g. for brake pad mounts and to improve adhesion. The light roughening of surfaces in order to improve adhesion of a subsequently applied coating is called sweeping. In the case of tarnishing, for example, rolling mills are specified for roughening. Metallic workpieces are also prepared for coatings made of chrome or nickel.

Coating removal

Coating removal is often also referred to as cleaning. It is a very important and multifaceted process. Coating removal, for example, of old coatings on existing components and structures, such as high buildings and bridges, is performed for the purpose of surface preparation and maintenance with subsequent recoating or even for inspection and examination. Oil and grease residue is removed from items such as vehicle parts, or moulds used for die casting, injection moulding, and glass are cleaned. Welding cinders and other residual welding elements are also removed.


Deburring is the process of removing or rounding cut edges. Examples of this would be the machined workpieces, such as milled or turned parts, laser-cut pieces, plasma-cut pieces, and thermal-cut pieces.
What we sell is anything but standard, it's innovation! Our products are not interchangeable. That's what makes us a reliable partner for our customers on new projects as well!
Rainer Boldt, Northeast abrasive agent sales


Descaling is a process for removing the cinders created during heat treatment, forging, pressing, or rolling. Blasted product examples are all hot rolling items, such as sheets, wires, and bar stock as well as forged items.

Rust removal

Rust removal is used to prepare or perform maintenance on surfaces to get ready for a subsequent coating

Smoothing / Polishing

This blasting application is used to eliminate tool marks created during machining. The matte functional surfaces of tools can also be polished.


Cleaning is a special application from the casting industry. This encompasses the removal of mould sand and casting residue on workpieces made of grey cast iron, steel, or cast aluminium that have been cast in sand moulds.
We are the only abrasive agent provider capable of offering you the optimal abrasive agent for your application from the full spectrum of available abrasive agents.
David Schäder, Sales Abrasives Westgermany


Shot peening or shot peening is used to enhance the fatigue strength of workpieces made of steel and cast steel that are subject to changing loads. The most well-known examples of this are all types of springs. It also eliminates stress concentrations that may be present at specific certain locations on workpieces. Furthermore, it is also used to minimise the damaging influences arising when workpieces are heat treated, such as decarbonisation or carbonisation, and surface corrosion.


The blasting task of shaping is used to profile and form components, especially in the aviation and astronautics industries. The curvature of vaulted pieces is a well-known example. It is also useful for correcting form and positioning deviations of thin-walled sheet metal or die cast parts caused during manufacturing.

Pferdekamp 6-8 | 59075 Hamm | Germany
T +49 (0) 23 81.977977 | F +49 (0) 23 81.977955 Office hours
Mon-Thurs. 7:00 a.m. – 5:00 p.m.
Fri. 7:00 a.m. – 2:00 p.m. 
Shipping times
Mon-Fri 6:00 a.m. – 2:00 p.m.